The Duncan Performance Stage 2 angle kit offers a large increase in steering angle and handling. This kit is the best bang for your buck for street driven drift cars, and for learning to drift. This is a direct bolt on kit, no cutting or welding is involved. This kit still utilizes stock, factory equipment, recommended for entry-level road racing also works well for amateur to Semi-Pro level Drifters. The Stage 2 Kit also works well for just everyday street driving. If you're a Mustang owner then you know the struggle of daily driving one in the city. With the Stage 2 kit, not being able to make a u-turn is now a thing of the past.
Adding the stage 2 kit will lower the car 1/4- 1/2 of an inch due to the longer control arms. The aluminum spacer will bring the car back at ride height or very close to it. Rolling the front fenders is highly recommended, especially if you plan on running aftermarket wheels and tires.
Please specify if you want 1 inch, 1 1/4 inch, or 1 1/2 in spacers by using the dropdown selection.
This kit can be used with all other factory supported equipment. Adding a bumpsteer kit, adjustable struts, adjustable coil overs, and/or adjustable camber/caster plates will only fine tune the car and make it that much better. Stage 1 & 2 kits are interchangeable.
Please specify if you are planning on running coilovers instead of factory coils as we will send you a different arm!
Stage Two kit parts list:
1. Modded spindles with ackerman adjustments
2. Custom A-arms
3. Bolt On wheel spacers in different sizes depending on wheel offset
4. Modded rack and pinion
5. Front control spring aluminum spacers
Spindles can come pre drilled for bolt through bump steer kit using a grade 8 conventional bolt or non machined so you can keep the stock Outer tie rod if you want. Please contact us if you want the spindle drilled for a bolt through bumpsteer kit. This is an additional $25.00.
On Foxbody's, only use Maximum Motorsports, or a Massive Designs bolt through extended bumpsteer Kit. SN95's and New Edge cars can use any regular bolt through bumpsteer kit.
Please note: that Modded rack and pinion can vary in price depending on year of car only Fox body Mustangs have advertised thousand dollar price SN and newer Mustangs can go up an additional $50-$100 for rack availability and price. The kit shown in the image above shows the Massive Designs Extended Bumpsteer kit, which is not included with this kit.
Kits are made to order in the USA, and may take up to 3 weeks to arrive.