Product Description
05-14 Mustang Quick Angle Kit 2.0 by Synergy Race Development
100% BOLT ON, NO DRILLING REQUIRED!
A seriously capable kit for a seriously good price, the Synergy Quick Angle kit takes the new approach to drifting suspension parts. It may seem that a full custom spindle and control arm setup is the only way to get a high performing kit, but the quick angle kits have proven otherwise. The bolt on spindle adapters provide the same benefits that a standalone spindle would at a fraction of the price, and allows you to keep more easily replaceable parts on your car.
This kit offers:
- a verifiable 62° of steering angle
- 3 position ackerman adjustment
- roll center correction
- ON-CAR caster adjustment
- PTFE lined rod end joints for more steering feel and to eliminate the squirm of rubber bushings
- Stock spindle trail correction
- Multi-part design to make replacing damaged parts more affordable and easier to do
This kit includes:
Spindle Adapters
- 1.625" Roll center correction
- 3 position ackerman adjustment
- Optimized steering arm length to maximize angle
- Billet Aluminum construction
- Steering stop plates that bolt on to the factory spindle
Control Arms
- On-car caster adjustment (6-9.75 degrees)
- Double shear rear mount
- Version 2.0 now has 1 piece arms!
- Integrated steering stop
- Minimum 2" over factory arm length
Extended Tie Rods
- Extended length for drift applications
- PTFE lined rod ends
(The selection of model year is based upon the ball joint size. If you are unsure of which model year or ball joint/spindle combination you have, you can measure the diameter of the ball joint shaft or the mating hole. The 05-10 will have a ~.705” diameter ball joint and the 11-14 will have a .750”.)
Please note: This angle kit requires coilovers to work! NOT DOT APPROVED, TRACK USE ONLY!
